Quality Atlanta GA septic system installers do a great deal of legwork, long before a unit gets put into the ground. A new unit will last many years, and possibly even generations, if it’s set up correctly, but it can fail instantly if it’s not. Additionally, all Atlanta GA septic system installers must acquire a permit for them to perform the install, and may ought to work with city or county officials to show that a number of tests were done in order to progress. These three evaluations are important initial steps that should always be taken before any task or designs are done, and it may also be advantageous to perform them before you buy a property, so you could be assured that a tank and leach field will be permitted.
1. Pit
The pit test is fairly straightforward. In the course of this test, a hole is excavated and the soil is analyzed to establish its composition. A typical leach field is dependent on the soil’s structure to drain successfully. If there is a bunch of gravel or sand, your leach field should be able to discharge the effluent (water) from the tank well, where the soil will finish cleaning it. If the soil has a lot of clay or rock, it won’t sink well, therefore a standard leach field will not be an alternative. If the site you’ve selected does not successfully pass the pit test, you may be able to pick another site on your home or use an alternate type of drain field, like a mound system.
2. Perc
The perc, or percolation test, calls for excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then saturating it with water. The hole is typically left drenched for about two hours, and refilled as needed. After this, the hole is filled with 6 inches of water and monitored for water drainage.
3. Visual
There are a variety of things an inspector will check into visually. Most units are gravity-fed, so they don’t depend on electricity or pumps to shift effluent from the tank to the leach field. As a result of this, the slope of the ground is very important. An inspector will also look for inclines that can feed excessive water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Enlist the Services of Quality Atlanta GA Septic System Installers Now
Selecting the right layout, style of system, and assessing the land properly, are all essential procedures in making sure an install goes off without a hitch. Most significantly, these steps ensure that the install is done correctly, so that a system provides many years of use without problems. If you’re prepping for an install, call Atlanta Septic Tank Pros. Our professionals are experienced and dedicated to quality, so you could be sure the job is done right. Call (404) 998-8812 today.