Quality Conyers GA septic system installers do a great deal of legwork, long before a unit gets put into the ground. A new unit will last years, and possibly even generations, if it’s installed correctly, but it can fall short right away if it’s not. On top of that, all Conyers GA septic system installers must secure a permit in order to perform the install, and may have to coordinate with city or county officials to show that specific tests were performed in order to move on. These three evaluations are essential first steps that should always be taken before any work or designs are done, and it may also be advantageous to do them before you acquire a property, so you can be assured that a tank and leach field will be permitted.
1. Pit
The pit test is relatively straightforward. During the course of this test, a hole is excavated and the soil is analyzed to determine its composition. A typical leach field is dependent on the soil’s structure to drain effectively. If there is a considerable amount of gravel or sand, your leach field should be capable to discharge the effluent (water) from the tank well, where the soil will finish sanitizing it. If the soil has a considerable amount of clay or rock, it won’t sink well, consequently a standard leach field will not be an option. If the site you’ve chosen does not pass the pit test, you may be able to select another site on your house or use an alternate type of drain field, such as a mound system.
2. Perc
The perc, or percolation test, involves digging a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then filling it with water. The hole is generally left drenched for about two hours, and topped off as needed. After this, the hole is filled with 6 inches of water and observed for drainage.
3. Visual
There are a variety of things an inspector will check visually. A lot of units are gravity-fed, so they don’t rely upon electricity or pumps to shift effluent from the tank to the leach field. Because of this, the incline of the ground is vital. An inspector will also try to find slopes that can feed excess water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Work with Quality Conyers GA Septic System Installers Today
Picking the right configuration, style of system, and assessing the land effectively, are all important steps in making sure an install goes off without a hitch. Most importantly, these steps guarantee that the install is done correctly, so that a system provides decades of use without problems. If you’re prepping for an install, call Atlanta Septic Tank Pros. Our technicians are experienced and devoted to quality, so you can be sure the job is done right. Call (404) 998-8812 today.