Quality Hampton GA septic system installers do a lot of legwork, long before a unit gets placed into the ground. A new unit will last years, and possibly even generations, if it’s placed correctly, but it can fall short instantaneously if it’s not. Furthermore, all Hampton GA septic system installers must obtain a permit for them to carry out the install, and may need to collaborate with city or county officials to show that specific tests were performed in order to move on. These three evaluations are vital first steps that should always be taken before any work or designs are done, and it may also be advantageous to accomplish them before you acquire a property, so you could be assured that a tank and leach field will be allowed.
1. Pit
The pit test is pretty direct. In the course of this test, a hole is dug down and the soil is examined to figure out its structure. A standard leach field is dependent on the soil’s structure to drain effectively. If there is a bunch of gravel or sand, your leach field should be ready to discharge the effluent (water) from the tank well, where the soil will finish sanitizing it. If the soil has a bunch of clay or rock, it won’t drain well, consequently a standard leach field will not be an alternative. If the site you’ve chosen does not successfully pass the pit test, you may be able to select another site on your property or use an alternate kind of drain field, such as a mound system.
2. Perc
The perc, or percolation test, requires excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then filling it with water. The hole is typically left soaked for about two hours, and refilled as needed. After this, the hole is filled with 6 inches of water and monitored for drainage.
3. Visual
There are numerous things an inspector will investigate visually. Most units are gravity-fed, so they don’t depend on electricity or pumps to transfer effluent from the tank to the leach field. As a result of this, the incline of the ground is crucial. An inspector will also look for slopes that can feed excessive water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Work with Quality Hampton GA Septic System Installers Today
Selecting the right configuration, style of system, and assessing the land properly, are all integral procedures in making sure an install goes off without a hitch. Most significantly, these steps guarantee that the install is done properly, so that a system provides many years of use without issue. If you’re prepping for an install, call Atlanta Septic Tank Pros. Our specialists are skilled and devoted to quality, so you could be sure the job is done right. Call (404) 998-8812 today.