Quality Johns Creek GA septic system installers do a lot of examination, long before a unit gets put into the ground. A new unit will last years, and possibly even generations, if it’s placed properly, but it can fail instantly if it’s not. Furthermore, all Johns Creek GA septic system installers must secure a permit in order to do the install, and may need to collaborate with city or county officials to show that a number of tests were performed in order to move on. These three tests are vital primary steps that should always be taken before any task or designs are done, and it may also be advantageous to accomplish them before you acquire a property, so you can be assured that a tank and leach field will be allowed.
1. Pit
The pit test is quite straightforward. In the course of this test, a hole is dug and the soil is examined to figure out its structure. A conventional leach field is dependent on the soil’s structure to drain successfully. If there is a lot of gravel or sand, your leach field should be able to discharge the effluent (water) from the tank well, where the soil will finish sanitizing it. If the soil has a considerable amount of clay or rock, it won’t drain well, therefore a standard leach field will not be an option. If the site you’ve chosen does not pass the pit test, you may be able to choose another site on your house or use an alternate kind of drain field, such as a mound system.
2. Perc
The perc, or percolation test, calls for excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then filling it with water. The hole is generally left saturated for about two hours, and refilled as needed. After this, the hole is filled with 6 inches of water and observed for drainage.
3. Visual
There are numerous things an inspector will check into visually. The majority of units are gravity-fed, so they don’t rely upon electricity or pumps to shift effluent from the tank to the leach field. As a result of this, the incline of the ground is crucial. An inspector will also seek out inclines that can feed excessive water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Hire Quality Johns Creek GA Septic System Installers Now
Selecting the right design, style of system, and assessing the land properly, are all fundamental procedures in making sure an install goes off without a hitch. Most significantly, these steps guarantee that the install is done properly, so that a system provides years of use without problems. If you’re preparing for an install, contact Atlanta Septic Tank Pros. Our technicians are experienced and dedicated to quality, so you could be sure the job is done right. Call (404) 998-8812 today.