
Quality Lilburn GA septic system installers do a great deal of examination, long before a unit gets installed into the ground. A brand new unit will last decades, and possibly even generations, if it’s placed the right way, but it can break down right away if it’s not. Additionally, all Lilburn GA septic system installers must secure a permit in order to execute the install, and may need to work with city or county officials to show that certain tests were run in order to progress. These three evaluations are necessary initial steps that should always be taken before any work or designs are done, and it may also be beneficial to do them before you acquire a property, so you can be assured that a tank and leach field will be permitted.
1. Pit
The pit test is quite uncomplicated. During the course of this test, a hole is dug down and the soil is examined to determine its composition. A standard leach field is dependent on the soil’s composition to drain successfully. If there is a lot of gravel or sand, your leach field should be able to discharge the effluent (water) from the tank well, where the soil will finish cleaning it. If the soil has a considerable amount of clay or rock, it won’t drain well, and so a conventional leach field will not be an option. If the site you’ve selected does not pass the pit test, you may be able to choose another site on your property or use an alternate kind of drain field, such as a mound system.
2. Perc
The perc, or percolation test, requires digging a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then filling it with water. The hole is generally left soaked for about two hours, and refilled as needed. Then, the hole is filled with 6 inches of water and monitored for drainage.
3. Visual
There are many things an inspector will investigate visually. A lot of units are gravity-fed, so they don’t rely upon electricity or pumps to move effluent from the tank to the leach field. As a result of this, the incline of the ground is very important. An inspector will also look for inclines that can feed excess water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Work with Quality Lilburn GA Septic System Installers Now
Selecting the right configuration, type of system, and assessing the land properly, are all integral procedures in making sure an install goes off without a hitch. Most importantly, these steps guarantee that the install is done correctly, so that a system provides years of use without problems. If you’re prepping for an install, contact Atlanta Septic Tank Pros. Our specialists are knowledgeable and devoted to quality, so you can be sure the job is done right. Call (404) 998-8812 right now.