Quality Milton GA septic system installers do a great deal of legwork, long before a unit gets placed into the ground. A new unit will last years, and possibly even generations, if it’s set up properly, but it can malfunction instantaneously if it’s not. Furthermore, all Milton GA septic system installers must obtain a permit for them to carry out the install, and may need to collaborate with city or county officials to show that certain tests were run in order to move on. These three tests are vital initial steps that should always be taken before any task or designs are done, and it may also be advantageous to accomplish them before you acquire a property, so you can be assured that a tank and leach field will be allowed.
1. Pit
The pit test is very direct. During the course of this test, a hole is excavated and the soil is examined to determine its composition. A conventional leach field is dependent on the soil’s structure to drain effectively. If there is a bunch of gravel or sand, your leach field should be ready to discharge the effluent (water) from the tank well, where the soil will finish cleaning it. If the soil has a considerable amount of clay or rock, it won’t drain well, consequently a traditional leach field will not be an alternative. If the site you’ve picked does not successfully pass the pit test, you may be able to select another site on your home or use an alternate type of drain field, such as a mound system.
2. Perc
The perc, or percolation test, requires excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then saturating it with water. The hole is commonly left soaked for about two hours, and refilled as needed. Then, the hole is filled with 6 inches of water and monitored for water drainage.
3. Visual
There are a variety of things an inspector will look into visually. A lot of units are gravity-fed, so they don’t depend on electricity or pumps to move effluent from the tank to the leach field. Because of this, the incline of the ground is vital. An inspector will also seek out slopes that can feed excess water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Hire Quality Milton GA Septic System Installers Now
Choosing the right layout, style of system, and assessing the land correctly, are all integral procedures in making sure an install goes off without a hitch. Most significantly, these steps guarantee that the install is done correctly, so that a system provides many years of use without issue. If you’re preparing for an install, contact Atlanta Septic Tank Pros. Our technicians are skilled and committed to quality, so you could be sure the job is done right. Call (404) 998-8812 now.