Quality Sandy Springs GA septic system installers do a number of legwork, long before a unit gets installed into the ground. A brand new unit will last decades, and possibly even generations, if it’s set up correctly, but it can fail instantaneously if it’s not. Furthermore, all Sandy Springs GA septic system installers must secure a permit in order to do the install, and may ought to partner with city or county officials to show that particular tests were run in order to proceed. These three evaluations are important initial steps that should always be taken before any task or designs are done, and it may also be beneficial to perform them before you purchase a property, so you could be assured that a tank and leach field will be permitted.
The pit test is relatively uncomplicated. During the course of this test, a hole is dug and the soil is analyzed to determine its composition. A conventional leach field is reliant on the soil’s structure to drain efficiently. If there is a considerable amount of gravel or sand, your leach field should be ready to discharge the effluent (water) from the tank well, where the soil will finish sanitizing it. If the soil has a bunch of clay or rock, it won’t sink well, and so a conventional leach field will not be an option. If the location you’ve chosen does not successfully pass the pit test, you may be able to pick another site on your house or use an alternate type of drain field, like a mound system.
The perc, or percolation test, requires excavating a 14-inch deep hole, adding a 2-inch layer of sand or gravel, and then filling it with water. The hole is typically left saturated for about two hours, and topped off as needed. Then, the hole is filled with 6 inches of water and monitored for water drainage.
There are numerous things an inspector will check into visually. The majority of units are gravity-fed, so they don’t rely upon electricity or pumps to shift effluent from the tank to the leach field. Because of this, the slope of the ground is essential. An inspector will also search for inclines that could feed excess water into the leach field, as well as nearby bodies of water, the water table, and distance from the proposed unit to things like the home and wells.
Enlist the Services of Quality Sandy Springs GA Septic System Installers Now
Selecting the right configuration, type of system, and evaluating the land effectively, are all integral procedures in making sure an install goes off without a hitch. Most significantly, these steps guarantee that the install is done correctly, so that a system provides many years of use without issue. If you’re preparing for an install, contact Atlanta Septic Tank Pros. Our professionals are experienced and committed to quality, so you can be sure the job is done right. Call (404) 998-8812 today.